SELTECH, INC.

Sales Engineers

HOME

APPLICATIONS

COMPANY INFO

Line Sheet - OK

Line Sheet - ARK TN MS

Distributor Items

CONTACT US

BULLETIN BOARD

EMPLOYMENT

WHAT'S NEW?

What's New?

This page is updated routinely to show exciting, new products being introduced to the market place.  

We have also provided a direct link to each manufacturer's website to download more details including brochures, manuals, etc.   Just click on the picture!

EMERSON Process Management:
X-STREAM O2 Combustion Transmitter

 

  • AccuMax enhanced system performance
  • Accuracy ±0.75% of reading or ±0.05% oxygen
  • Signal stability of ±0.03% oxygen
  • Insensitive to process temperature changes ±0.02% from 100-700°C
  • Calibration validity of better than 0.02%
  • Adaptable to most existing oxygen probe installations
  • 2-wire, loop-powered electronics
  • HART communications standard
  • Extended process temperature range to 850°C (1562°F)
  • Advanced sensor diagnostics, including "calibration recommended"
  • Oxycore sensor core replacement in minutes
  • Stoichiometer feature measures oxygen deficiency during reducing conditions
  • Two-year sensing cell warranty
  • AMS/PlantWeb® compatible with EDDL
Rosemount X-STREAM O2
pH Analyzer
MODEL 1056

EMERSON Process Measurement (Rosemount) 

  • MULTI-PARAMETER INSTRUMENT - with single or dual inputs. Choose from any combination of pH/ORP/ISL, Resistivity/Conductivity, % Concentration, Chlorine (Total, Free, Monochloramine, pH independent Free Chlorine), Oxygen, Ozone and Temperature.
  • LARGE DISPLAY – large easy-to-read process measurements.
  • EASY TO INSTALL – modular boards; removable connectors easy to wire power, sensors, and outputs.
  • INTUITIVE MENU SCREENS with advanced diagnostics and help screens.
  • SIX LANGUAGES are included with every analyzer: English, French, German, Italian, Spanish, and Portuguese.
  • DIAGNOSTICS - continuously monitors itself and the sensor(s) for problematic conditions. The display flashes Fault and/or Warning when these conditions occur. Information about each condition is quickly accessible by pressing the diagnostic button on the keypad. Help screens are displayed for most fault and warning conditions to guide the user in troubleshooting.

EMERSON Process Measurement (Rosemount) 


FREE CHLORINE (FCLi) ANALYSIS

  • Rosemount's Complete System Includes: sensor, connecting cable, analyzer, and flow controller.
  • No Need For pH CORRECTION. Eliminates expensive and messy reagents and troublesome sample conditioning systems. NO REAGENTS!!
  • MEASURES FREE CHLORINE IN WATER with pH from 6.0 to as high as 9.5.
  • VARIOPOL QUICK-DISCONNECT FITTINGS make replacing sensors easy.
  • FEATURE-PACKED ANALYZER: dual outputs, three fully-programmable alarm relays, two-line display. As an option, pH output can still be provided.
Free Chlorine Analyzer
Insertion Mass Vortex Flowmeter

From Sierra Instruments:

Innova-Mass® 241 Insertion Mass Flow Meter

Featuring Built-in Flow Computer and Modem:  Sierra Instruments, Inc. of Monterey, California has produced the first Innova-Mass multivariable vortex mass flow meter for steam, natural gas, compressed air, and other applications where volumetric flows must be compensated for either temperature or pressure or both. The flow meter provides a direct reading of Mass Flow Rate in lb/hr, SCFM, etc. along with the Temperature, Pressure, Density, and Volumetric Flow rate. Up to three analog outputs are provided along with the HART signal. These type multi-variable meters are also used for AGA-8 natural gas measurement and for Steam Custody Transfer applications.

Mass Flow Controllers
Series 100 MFC

From Sierra Instruments:

"Dial-A-Gas" and true digital performance in the latest generation MFC: Series 100.

Designed for both OEM customers and end-users, SmartTrak offers accurate, reliable performance, an easy-to-use interface, rugged stainless steel construction, and maximum flexibility. Unlike most analog Mass Flow Controllers (MFC) that are built to order for specific gases and flow ranges, SmartTrak lets you select from up to 10 gases and adjust operating parameters to accommodate unexpected application or system design changes. The instrument is also available as a mass flow meter and now in several sizes & configurations for flow rates from 0-10 SCCM to 0-1000 SLPM.

True Wireless Gas Detection



From 
GASTRONICS:


This System provides for True Wireless Gas Detection in an Explosion Proof environment, with a UHF Licensed Radio for transmission of data to a Remote Base site several miles away. The local flashing strobe light alerts the technician prior to approaching the site that it is in alarm mode. This same type of system can be used for remote, tank level monitoring.

Standard hard-wired transmitters are available as well to tie into existing systems or provide low cost alternatives when the wired sensor is the most economical choice. The most common sensors include chlorine, ammonia, combustible gas, hydrogen sulfide, sulfur dioxide, & carbon monoxide but other gases are available as well like phosgene, fluorine, hydrazine, etc.  

Model 532 Calibrator

From

Practical Instrument Electronics (PIE)

This new mA Calibrator includes the Patented feature of Loop Diagnostics not found on competitive calibrators along with an unsurpassed accuracy of 0.005% of Reading!

It will not only read &/or source a 20mA loop but will also tell you if there is any current leakage in the loop or if there is a HART signal present. Includes a 3 Year Warranty.

From

MOORE INDUSTRIES:

Our new NET Concentrator® System is a process control and distributed I/O network that lets you use powerful new advances (like Ethernet, the Web and wireless) to interface field devices in a process plant with a DCS, PLC, or some other type control system.

These devices may include Analog signals, Rtds, Thermocouples, Frequency inputs, etc. simply by selecting the various plug-in modules for expansion to ultimately handle hundreds of signals over a single pair of wires within milliseconds. 

 

 

 

 

The NCS Goes Wireless!
When wires can't be run for practical or economic reasons, our Wireless Link Module (Model WLM) provides accurate and reliable wireless connectivity between remote field sites. A bi-directional, spread spectrum radio modem, the WLM is ideal for use with Moore Industries' NET Concentrator System to overcome rugged, long-distance or normally impassable environments. You can send just a few, or thousands of, process signals over one low-cost wireless communication link.

  • Reliable Intelligent Spectrum Frequency Hopping Technology
  • Standard operating frequencies of 900MHz and 2.4GHz
  • Long distance transmission of up to 25 miles
  • FCC site license is not required

- - - - - - - - - - - - - - - - - - - - - - -

NCS System
Wireless Modules
Insertion Flow Meter
BADGER (Data Industrial) Sensors
SDI insert style flow sensors are intended for general flow measurement applications such as in HVAC and irrigation use. They are available in either brass or stainless steel construction. The insert style sensors are intended for direct installation into pipelines through a 1" tap. The pipeline must be out of service and not under pressure at the time of installation. For any pipeline that is in service at the time of installation or cannot be de-pressurized and drained for service, Data Industrial recommends the use of our SDI "hot tap" models that are equipped with isolation valves.

Standard sensor stem lengths accommodate pipe sizes from 1˝" through 10" in diameter. Larger sizes usually require the use of hot tap models.

Accuracies of +/-1 % of Rate may be achieved.

Web Hosting powered by Network Solutions®